5BY0-103200 Lower Steering Universal Shaft Single Pack Compatible with CFMOTO ZForce 950 Sport 2021 ZForce 950 HO EX 2022 ZForce 1000 Sport 2021-2024 Replaces 5BWV-103200-5100

Product InformationOE Part Number: 5BY0-103200Cross-Reference: 5BWV-103200-5100 (G2 series later version)Product Type: Lower Steering Universal ShaftPackage: Single Pack (1 Pc Lower Steering Universal Shaft)Installation Location: Between Steering Motor and Steering Rack (Lower Position)Installation Type: Direct Bolt-On ReplacementShaft Material: High-Strength Steel with Black Anti-Corrosion CoatingUniversal Joint Type: Precision-Ground Cross Pins with Needle Roller BearingsFitment Verification ChecklistBefore ordering, please verify:1. Your vehicle is a CFMOTO ZForce 950 Sport (2021) or ZForce 950 HO EX (2022) or ZForce 1000 Sport (2021-2024).2. The original shaft part number is 5BY0-103200 or 5BWV-103200-5100.3. The shaft mounts with M8 bolts connecting steering motor and steering rack.4. The part is listed in your CFMOTO parts diagram under "Steering System (F10)".5. Your model code matches: CF1000US-A, CF1000SZ-D, CF1000UTR-B, or CF1000UTR-C.6. The shaft length and yoke bolt pattern match the original part.Complete Verified FitmentCFMOTO ZForce 950 Sport — 2021Model Code: CF1000US-A | Colors: Ghost Grey, Fire RedPart Reference: 5BY0-103200 (Steering System F10, Item 24)CFMOTO ZForce 950 HO EX — 2022Model Code: CF1000SZ-D | Color: Nebula BlackPart Reference: 5BY0-103200 (Steering System F10, Item 24)CFMOTO ZForce 1000 Sport — 2021-2022Model Code: CF1000UTR-B | Trims: GD, HLG, SSPart Reference: 5BY0-103200 (Steering System, Item 24)CFMOTO ZForce 1000 Sport — 2023-2024Model Code: CF1000UTR-C | Trims: GD, HLG, SSPart Reference: 5BY0-103200 (Steering System, Item 24)Note on G2 Series Models:For 2023+ ZForce 950 Sport G2, 950 HO Sport G2, and 950 Sport-4 G2 models, the updated part number is 5BWV-103200-5100. The 5BY0-103200 shaft may still fit these models physically but is not the cataloged replacement — verify dimensions before installing on G2 vehicles.Why Replace Your Steering Universal Shaft?The lower steering universal shaft is a wear component in the power steering system. Over time, the needle bearings inside the universal joint cross pins degrade from off-road vibration, mud, water ingress, and high steering loads. A worn shaft causes: steering wheel looseness, clicking/clunking during turns, inconsistent steering feel, and reduced control precision at speed. Replacing the shaft restores original-equipment steering tightness and ensures safe vehicle operation.Important- This is an aftermarket replacement part — compatible applications are verified against listed OE part numbers and model codes.- Vehicle names, model names, and part numbers are used only to verify compatibility.- Always disconnect battery and properly torque mounting bolts per CFMOTO service specifications (25 Nm for M8 bolts).- Professional installation by a qualified powersports technician is strongly recommended.

• [OE PART NUMBER VERIFICATION] Replacement for CFMOTO lower steering universal shaft part numbers: 5BY0-103200 and 5BWV-103200-5100 (later G2 series). Verify your original shaft part number stamped on the existing part or found in the CFMOTO parts diagram (reference F10 Steering System EPS). Confirm model code (e.g. CF1000US-A, CF1000UTR-B) before ordering to ensure exact fitment.
• [FUNCTION + FAILURE SYMPTOMS] This lower steering universal shaft connects the power steering motor output to the steering rack input, allowing angular articulation while transmitting torque. When worn, symptoms include: excessive steering wheel freeplay or looseness, clicking/clunking sounds when turning, steering wander at speed, and delayed steering response. Replacing a worn shaft restores precise steering control, tight response, and safe off-road handling.
• [COMPATIBLE WITH ZFORCE 950 SPORT - 2021] Fits CFMOTO ZForce 950 Sport 2021 models with code CF1000US-A (including colors: Ghost Grey, Fire Red). Always verify by original part number 5BY0-103200 in the CFMOTO parts catalog or service diagram before purchase.
• [COMPATIBLE WITH ZFORCE 950 HO EX - 2022] Fits CFMOTO ZForce 950 HO EX 2022 models with code CF1000SZ-D (Nebula Black). Cross-check against the lower steering shaft part number shown in your steering system parts diagram (Section F10).
• [COMPATIBLE WITH ZFORCE 1000 SPORT - 2021-2022] Fits CFMOTO ZForce 1000 Sport 2021-2022 models with code CF1000UTR-B (including GD, HLG, and SS trim specifications). Confirm model code on VIN plate or owner manual.
• [COMPATIBLE WITH ZFORCE 1000 SPORT - 2023-2024] Fits CFMOTO ZForce 1000 Sport 2023-2024 models with code CF1000UTR-C (including GD, HLG, and SS trim specifications). Confirm model code on VIN plate or owner manual.
• [OE-SPEC CONSTRUCTION] Built to match original equipment specifications: high-strength alloy steel universal joints with precision-ground cross pins, pre-greased needle roller bearings for low-friction operation, and heavy-gauge steel shaft body with M8 bolt mounting interface. Black anti-corrosion finish on shaft and yokes. Direct bolt-on fit — no modifications, welding, or drilling required.
• [PACKAGE CONTENTS] Includes one (1) complete lower steering universal shaft, individually packaged and inspected before shipment. Replace the failed shaft on your steering system or keep on hand as an essential trail-side spare for off-road reliability. If your vehicle requires replacement of both the upper and lower steering shafts, search our store for the matching upper shaft or order two single units.
• [INSTALLATION NOTES] Disconnect battery negative terminal before service. Remove existing shaft by loosening the upper and lower M8 mounting bolts. Extract the old universal shaft and align the new shaft yokes to match the original orientation. Torque M8 bolts to 25 Nm. Reconnect battery and test steering for smooth operation through full lock-to-lock travel. We recommend professional installation by a qualified powersports technician.
• [COMPATIBILITY NOTE] Vehicle names, model names, and OE part numbers are used solely to verify compatibility. This is an aftermarket replacement steering shaft, not a CFMOTO-manufactured part. Verify your original part number (5BY0-103200 or 5BWV-103200-5100 on G2 series) and model code before ordering. Improper installation or use on incompatible models may result in steering failure. Fitment not guaranteed for models outside the verified list.